A colorless impregnation dedicated to the impregnation of old bricks and old brick tiles. Agent for use outside and inside. Deeply penetrating the substrate, it creates a layer that protects against weather conditions and UV radiation. In addition, it protects against the formation of fungi, mosses and lichens. It ensures maintaining the aesthetic appearance and retains the color of the surface for many seasons. The impregnation does not change the color of the impregnated surfaces.
Impregnation instructions:
The impregnated surface should be dry and thoroughly cleaned.
Apply the product evenly with a brush, roller or spray.
The second layer should be applied no later than after 30 minutes, while the impregnated surface is still damp (the so-called "wet on wet" method). For larger areas, it's a good idea to divide the area into smaller sections. Already the first layer of impregnation after drying shows protective properties and it will not be possible to apply another layer of the product.
The impregnated substrate should be protected against all kinds of precipitation and other contamination for up to 24 hours (until the preparation is completely dry).
Efficiency: Depending on the absorbency of the substrate and the method of application, 4-6 m² from 1 liter of product with double impregnation.