Intensiv WET - Hydrophobic impregnation for architectural concrete slabs

Hydrophobic impregnation for architectural concrete.

PRODUCT DESCRIPTION: Impregnation intended for colorless protection against water, environmental conditions weather as well as light dirt: architectural concrete, concrete facade stone, facing bricks, natural stone, paving stones, joints and all concrete accessories, as well as thin-layer acrylic and silicone facade coatings. Operation and efficiency largely depend on the degree of density of the structure of the impregnated material. The impregnation penetrates the structure of the material, sealing the micro-pores. Apply the impregnation in fragments, it is recommended to use a roller or spray for application. Possible number of impregnation layers is 1-3, wet on wet method. If necessary, impregnation can be repeated after the previous layers are dry (recommended).

APPLICATION: It is designed for impregnation of concrete facade stone, facing bricks , natural stone, paving stones, joints and all concrete accessories.

PROPERTIES:

• does not change the surface appearance, does not create a coating,
• not visible after drying,
• drying time 5h,
• effective indoors and outdoors,
• keeps the natural look of concrete,
• vapor permeable.

CONSUMPTION: 1L is enough for approx 6-13 m2 (1 layer).

PACKAGING: 1L container.

The durability of the impregnation largely depends on the applied care products and the use of the surface. It is not advisable to use highly degreasing agents containing solvents or alcohol, as well as acidic and strongly alkaline preparations that may weaken the effect of the impregnation. For frequently washed surfaces that come into contact with cleaning agents, e.g. bathrooms or kitchen worktops, we recommend renewing the impregnation every 2 years.

Before starting work, perform a test on a small area, out of sight, to assess the appearance of the material after impregnation. If the effect is satisfactory, you can proceed to impregnation of the entire surface. After the works are finished, ventilate the room until the smell disappears completely. Clean tools with water.