DS sampler - concrete board (cappuccino...
zł9.99
Board samples from the DS series. The gross price applies to 1 sample in the size of 20x10 cm.
Sample plates from the DS series. The gross price of PLN 9.99 applies to 1 sample in the size of 14x14 cm.
Professional customer service
Secure delivery sent directly to you
Model of slabs with decorative particles has a decorative pattern embedded on the surface which, at different angles with lighting directed at it, brings out unique visual qualities from the slabs in the form of particles shimmering in the light. Each slab has a different and unique pattern of particles on the surface which is its value.
Architectural concrete PRC (Polymer Reinforced Concrete) the slabs are made of is reinforced concrete with polymer fibers. Thanks to this structure, produced slabs can have 1 cm thickness, keeping strength and durability two three times thicker concrete slabs that are made using traditional methods.
Concrete slabs can be used both for inside houses as well as outside as facade. Combined with a variety of patterns 3D panels available in our online store (view 3D panels), you can create unique and modern interiors.
Slabs offered by WENEVE have wide range of applications:
MAIN FEATURES OF THE PRODUCT:
Below is a color sampler of concrete slabs from the DS series: (buy samples here)
The price is for 1 pc (in the selected size)
For the installation of concrete panels it is recommended to use dedicated chemicals also available in our store. Possible factory deviations of architectural concrete slabs must be reported before installation.
Due to the characteristics of architectural concrete, differences in the number and size of pits on the surface of individual slabs are possible. Color and dimensional discrepancies (+/- 3 mm) are also allowed.
Aggregate in the version of the slabs with high porosity may fall off the slabs due to its excess in the production process. The sprinkling stops after the slabs are vacuumed, then the remaining aggregate embedded in the concrete stays attached or the other method preventing aggregate from falling off slabs is impregnating them with the DS series impregnation, then the aggregate surplus will be glued to the slab.
Before installation, check the entire batch of slabs and plan the distribution of individual slab and the sequence of their installation, selecting slabs from different places on the pallet to maintain the natural appearance of the wall.
For demonstration purposes, the plates in the photos, realizations and visualizations are shown in different color versions. To make a color selection based on actual colors, we suggest you purchase sampler of DS series concrete slabs.
The displayed colors on customer monitor screen may differ from the actual color due to the discrepancy of displays and the calibration of the displays.
The slabs may have cast remnants on the edges, which the assembly team should sand down before installing slabs on the wall.
Data sheet
Architectonic concrete - smooth or medium porosity.
12 shades of 2D slabs in wide range of 17 sizes (wall and floor). It's characterized by high frost and flame resistance. Perfect for interiors, as well as facades, floors and terraces.
Available sizes:
Architectonic concrete with medium or high porosity.
The DS series is handcrafted and the concrete features a very strong PRC-reinforced structure.
Series attributes:
Available sizes:
Link to the entire series of DS products in store: (DS Series)
Architectonic concrete with medium porosity.
The LS series is handcrafted and the concrete has a very strong GRC (Glass-fiber Reinforced Concrete) structure in the case of 1 cm thick slabs. In the case of 2 cm and thicker slabs, PRC (Polypropylen-fiber Reinforced Concrete) reinforcement is used.
Series attributes:
Available sizes:
Link to the entire series of LS products in store: (LS Series)
Basic differences between slab series.
VT Series | DS Series | LS Series | |
Available concrete colors | 12 | 8 | 4 |
Available sizes | 17 | 4 | 3 basic + molded to size |
Slab thickness | 1-3 cm | 1 cm | 1-3 cm |
Order fulfillment [business days] | 7-10 | 14-21 | 3-9 + 14-30 |
Porosity | Smooth / Medium | Medium / High | Medium |
Cutting to size | Yes | No | No |
Crafting method | Machine | Handcrafted | Handcrafted |
Type of reinforcement | Chemical | PRCG | GRC / PRC |
Custom dimensions | No | No | Yes |
- | - | - | - |