Minileiste - (gold) - A minimalist aluminum inter-floor joining strip
Professional customer service
Secure delivery sent directly to you
A minimalist skirting board that creates a discreet and innovative connection between different floors. From the visual point of view it will fit perfectly wherever there is a need to make subtle and elegant floor finish.
Main product features:
- Minimalistic, tidy and aesthetic
- Quick & easy fitting - without tools, dirt and mess free
- Perfect match for wooden and concrete surfaces, as well as parquetes and tiles
- Aluminium build ensures durability, water resistance and prevents swelling
- Universal design - subtle finishing touch for each interior
- High scratch and wear resistance - can be used in both, home and commercial interiors
- Available in 5 color versions
- Price for one profile - 2 meters running (profile doesn`t contain mounting clips - available here)
- Product innovation has been awarded with a prestigous Red Dot Award
Floors are a basic architectonical element. The way they are finished has major impact on how whole interior is perceived.
Finishing profiles Minileiste offer completely new approach to transitions - thoughtful design allows for almost perfectly flat transition between almost any surfaces, not only floor and a wall. High quality materials used in production of our profiles ensures very long life span of the product.
They are perfect for use as a minimalist skirting board connecting floors between rooms or spaces, between the bathroom and the corridor, kitchen and living room, around fireplaces or between the living room and HST and PSK terrace doors flush with the floor.
Minileiste profiles stand out not only because of their quality and aesthetic aspect, but primarly due to simplicity of the installation process, not requiring any specific tools - without drilling, hammering or screwing.
Fitting process can be divided in 8 simple steps:
Step #1The gap width, depending on the selected model, should be 5 - 8 mm or 5 - 13 mm. The thickness of the floor covering should also be taken into account. Our skirting boards can be used from the minimum thickness of 5 mm.
Step #2Get the desired cut dimensions from the wall surface. Include miter cuts at inside and outside corners.
Step #3Cut profiles to size. Miter cutting of an inside or outside corner is performed in one operation. The cutting direction of the saw presses the profile against the wooden support during the cutting process.
Step #4Insert the mounting clips on the side of the profile. Note: There are two opposite arms built into the profile, between which mounting clips can be easily led.
Step #5Mounting clips should be placed approximately 30 to 60 cm apart. Depending on the unevenness of the wall, individual mounting clips can be installed at closer intervals so that the profile is flush with the wall.
Step #6Profile with inserted mounting clips should be placed in the mounting position on the wall surface. Unfold the mounting clips by carefully pressing them against the wall using a dedicated mounting tool.
Step #7Press the profile against the floor and repeat the assembly process until all strip clips are tight and sunk. The profile can be removed at any time in order to make any corrections.
Step #8Profile has been successfully installed. After a short check, the next section can be fitted.
- 200 x 2 x 0,1 cm
- Flat (10 mm) - 106 g
Flat (16 mm) - 142 g
Skirting - 256 g
Transition - 154 g
- Minimal covering thickness
- 5 mm
- Minimal gap height
- 5 mm
- Connection width
- Flat (10 mm): 5 - 8 mm
Flat (16 mm): 5 - 13 mm
Skirting: 5 - 13mm
Transition: 5 - 13 mm
- Transition profile
- 200 cm
- 20 mm
- 1 mm
- To kitchen
- To bathroom
- To living room
- For commercial and service premises
- Custom dimensions
- Factory cutting to size
- Trimming by the customer
- Drilling required
- Gluing required
- Scratch resistance
- High - 33 (DIN EN 13329)
- Set of
- Profile only
- I'M ORDERING