DS (anthracite with black particles) - architectural concrete slab ultralight
PRC concrete slabs are available in 1 cm of thickness, which allows you to mount them in any way available on the market.
Professional customer service
Secure delivery sent directly to you
Model of slabs with decorative particles has a decorative pattern embedded on the surface which, at different angles with lighting directed at it, brings out unique visual qualities from the slabs in the form of particles shimmering in the light. Each slab has a different and unique pattern of particles on the surface which is its value.
Architectural concrete PRC (Polymer Reinforced Concrete) the slabs are made of is reinforced concrete with polymer fibers. Thanks to this structure, produced slabs can have 1 cm thickness, keeping strength and durability two three times thicker concrete slabs that are made using traditional methods.
Concrete slabs can be used both for inside houses as well as outside as facade. Combined with a variety of patterns 3D panels available in our online store (view 3D panels), you can create unique and modern interiors.
Slabs offered by WENEVE have wide range of applications:
- room walls,
- fireplace enclosures.
MAIN FEATURES OF THE PRODUCT:
- Ultralight - 30x60 cm - 3 kg / 60x60 cm - 6 kg / 100x50 cm - 8 kg / 120x60 cm - 12 kg.
- Frost resistant - for indoor use on walls as well as building facades.
- Reinforced - our slabs are one of the strongest PRC slabs on the market, thanks to a specially developed formula of concrete combined with properly selected aggregates and polymer fiber reinforcing the entire structure of the board. Compressive strength - strength class C20 / 22. Reaction to fire - class A1.
- Easy and cheap installation - 1 cm thickness of the plates simplifies the assembly procedure, you will only need some primer and one of our glues such as: polyurethane foam glue or elastic glue (does not require fixing anchors, additional reinforcements other stabilizers). Our slabs can be easily cut, drilled and mounted to the OSB, MDF Gypsum boards.
- Depending on the room in which we want to use the slabs, they should be used accordingly impregnated after installation. For this purpose, we recommend using an impregnation from our offer (view and buy).
- 2 YEARS OF WARRANTY ON SLABS - on all concrete slabs of the DS series, using a dedicated installation set (view and buy).
Below is a color sampler of concrete slabs from the DS series: (buy samples here)
The price is for 1 pc (in the selected size)
For the installation of concrete panels it is recommended to use dedicated chemicals also available in our store. Possible factory deviations of architectural concrete slabs must be reported before installation.
Due to the characteristics of architectural concrete, differences in the number and size of pits on the surface of individual slabs are possible. Color and dimensional discrepancies (+/- 3 mm) are also allowed.
Before installation, check the entire batch of slabs and plan the distribution of individual slab and the sequence of their installation, selecting slabs from different places on the pallet to maintain the natural appearance of the wall.
For demonstration purposes, the plates in the photos, realizations and visualizations are shown in different color versions. To make a color selection based on actual colors, we suggest you purchase sampler of DS series concrete slabs.
The displayed colors on customer monitor screen may differ from the actual color due to the discrepancy of displays and the calibration of the displays.
The slabs may have cast remnants on the edges, which the assembly team should sand down before installing slabs on the wall.
- Slab series
- (2D) DS series
- 100x50 cm
- HAP (porous)
- Black particles
- 30x60 cm ~ 3 kg
60x60 cm ~ 6 kg
100x50 cm ~ 8 kg
120x60 cm ~ 12 kg
- Type of reinforcement
Water-resistance (after impregnation)
- 1 cm
- For facades
- Yes (after impregnation)
- To kitchen
- Yes (after impregnation)
- To the fireplace
- Yes (with the use of appropriate glue)
- To bathroom
- Yes (with the use of impregnation and flexible grout)
- On the floor
- Custom dimensions
- Factory cutting to size
- Trimming by the customer
- Yes (dry trimming with diamond tools)
- Drilling by customer
- Yes (drill without hammer)
- Cutting holes by the customer
- Yes (with diamond hole saw)
- I'M ORDERING
2. Calculation results
Based on your data we calculated required amounts of slabs and dedicated chemicals.
Ground: Brak informacji
Glue: Brak informacji
Leveling system: Brak informacji
Impregnation: Brak informacji
3. Buy now
To make purchase process even simpler, we prepared list of all required products for You. You can choose preferred accessories and add them all to cart with one click, using "Add to cart" button.
|Name||Needed quantity||Unit price||Total price|
Differences between slab series
VT Series / DS Series
Architectonic concrete - smooth or medium porosity.
- ORDER FULFILLMENT: 7-10 business days
- 5 YEARS WARRANTY(with the use of dedicated assembly chemistry)
12 shades of 2D slabs in wide range of 17 sizes (wall and floor). It's characterized by high frost and flame resistance. Perfect for interiors, as well as facades, floors and terraces.
- 30x60x1 cm
- 60x60x1 cm, 60x60x2 cm
- 80x40x1 cm, 80x40x1,5 cm
- 90x45x1 cm
- 90x55x1 cm
- 100x50x1 cm, 100x50x2 cm
- 100x100x2 cm
- 120x60x1 cm, 120x60x2 cm, 120x60x3 cm
- 120x80x2 cm, 120x80x3 cm
- 150x60x2 cm, 150x60x3 cm
Link to the entire series of VT 2D products in store: (VT Series (2D))
Architectonic concrete with medium or high porosity.
- ORDER FULFILLMENT: 14-21 business days
- 8 basic colors in two porosities (white, light gray, dark gray, anthracite, brown, cappuccino, graphite, green)
- 3 particle colors in two porosities (gold, silver, black)
- 7 colors of corten (white, gray, anthracite, graphite, cappuccino, brown, green (patina))
The DS series is handcrafted and the concrete features a very strong PRC-reinforced structure.
- For interiors and facades
- Easy installation
- 30x60x1 cm
- 60x60x1 cm
- 100x50x1 cm
- 120x60x1 cm
Link to the entire series of DS products in store: (DS Series)
Basic differences between slab series.
Available concrete colors
Order fulfillment [business days]
Smooth / Medium
Medium / High
Cutting to size
Type of reinforcement