DS (graphite with black particles) - architectural concrete slab ultralight

zł95.99

(zł266.64 / m2)

Tax included

PRC concrete slabs are available in 1 cm of thickness, which allows you to mount them in any way available on the market.

I'M ORDERING
Decoration
Porosity
Dimensions
Thickness
Impregnation
Color:

Graphite

Quantity
czas realizacji Order fulfillment: 14-21 working days

 

Professional customer service

 

Secure delivery sent directly to you

kruszywa ozdobne seria ds

Main product features 


light Light
30x60 cm - approx. 3 kg
60x60 cm - approx. 6 kg
100x50 cm - approx. 8 kg
120x60 cm - approx. 12 kg


frost resistant  Frost resistant

fireproof  Fire resistant


Purpose: walls / facades / fences / fireplaces


Concrete slabs can be used both indoors and outdoors as a form of the facade. In combination with various patterns of 3D panels available in our store (see products), you can create unique and modern interiors and building facades. The slabs can also be successfully laid on fences and fireplaces due to their fire resistance. 

 

Properties


medium porosity  high porosity  Two types of porosity

Medium, characterized by small, round holes resulting from the air-entrainment of concrete with a thin consistency, evenly distributed over the entire slab.

Large which has larger, irregular holes, resulting from the use of a denser concrete mix. They occur unevenly, which may result in fragments without holes or with fewer of them. This is the result of the manual trowelling of concrete in forms. 




resilience  Resilience

Architectural concrete PRC (Polymer Fiber Reinforced Concrete), from which the slabs are made, is concrete reinforced with polymer fiberThanks to this structure, the produced slabs can be 1 cm thick, maintaining the strength and durability of two or three-times thicker concrete slabs produced using traditional methods. Compressive strength - strength class C20/22. Reaction to fire - class A1.

rodzaje porowatosci ds
5Szary2.jpg

Ornaments


types of decorative aggregates Three colors of aggregate

Gold  /  Silver /  Black - depending on the porosity of the slab, the aggregate is arranged on it in a different way.


In the case of a slab with medium porosity, the aggregate is distributed flat and evenly on the surface, shining at one angle.

In the case of a slab with high porosity, the aggregate is collected in a larger amount locally, which makes it shine at many angles. Looking at the slab from each side, you can see reflections of light reflecting off the aggregate particles. 

Impregnation


Depending on the room in which we want to use the slabs, they should be properly impregnated. For this purpose, we recommend using an impregnation from our offer (impregnation - buy the product).

For slabs with high porosity, it is recommended to use an impregnation for surface gluing of the aggregate, so that the production surplus of decorative elements is merged on the surface of the slabs.



impregnationFactory impregnation

In addition, we offer factory-impregnated slabs options for even greater convenience and speed of installation. Just select this option from the drop-down list of available product combinations. 

 

impregnacja zdjęcie

Necessary mounting accessories

Klej

Glue

Grunt

Primer

System poziomowania

Leveling system

Impregnat

Impregnate

narzedzia do docinania i wiercenia

Machining concrete slabs of the DS series


cut to size  Cutting to size

Our slabs can be easily cut to the desired size using diamond discs for concreteYou can use a regular angle grinder or a circular saw for this purpose. Cutting should be done dry without the use of water. 



drilling holes  Drilling holes

Using drills and hole saws for concrete, mounting holes for sockets or TV brackets can be made in the slabs. All holes must be drilled without hammering

 

  

Installation


motnaz Easy and cheap assembly 

The thickness of the slabs, 1 cm, simplifies the installation procedure, all you need is polyurethane foam from the DS series available in our store (does not require anchors, additional reinforcements or other stabilizers in the case of internal walls). The slabs can be mounted to OSB, MDF or GK slabs if you do not want to sand the paint and putty on the substrate. The gypsum substrate is not suitable for direct bonding of architectural concrete. 

instruction Installation instructions

The complete, detailed installation and storage instructions after delivery are available for download here.


extended warranty Extended warranty

2-year warranty against damage after installing the slabs, using a dedicated mounting kit, listed in the "necessary mounting accessories" section.
Cracks, deformations, and falling off the wall - may occur if the recommended accessories are not used.
Read the assembly instructions before starting any assembly work.

system montazu

How to choose the right amount of slabs and accessories for your wall? 


Use the calculator that we have designed for a comprehensive selection of all necessary materials.

gif z kalkulacją

calculator  Calculator

Step 1 -  enter the dimensions of the wall
The calculator will calculate, based on them, the number of panels and accessories needed for installation. Then, from the available slab sizes, select the slab size and the horizontal or vertical orientation.

Step 2 -  see the proposed arrangement of slabs on the wall
The calculator takes into account cutting up to two elements with a factory-cast edge from one slab. You will be offered the number of slabs along with the necessary accessories for assembly. 

Step 3 -  add products to the cart
After going to the cart, you will receive additional information on delivery costs. 

Thanks to the one-step shopping cart, the ordering process is very simple and fastIn one window, you will enter shipping data, and invoices, choose the transport and payment method, and finish the whole process with fast payments by Przelewy24.pl or a traditional transfer.

 

Go to the calculator 

Additional information Additional information:

▫️ For the installation of concrete panels, it is recommended to use dedicated mounting accessories also available in our store.

▫️ Possible factory deviations of architectural concrete slabs should be reported before installation.

▫️ Due to the characteristics of architectural concrete, differences in the number and size of pits on the surface of individual slabs are possible. Color and dimensional discrepancies (+/- 3 mm) are also allowed.

▫️ Aggregate on the surface of the slab is arranged naturally when pouring concrete into the forms. On each slab, the aggregate is laid in a different way, so you should plan the arrangement by spreading the slabs on the floor before gluing them to the wall.

▫️  Aggregate in the version of slabs with high porosity may fall off the slabs due to its excess in the production process. The scaling stops after the slabs are vacuumed, then the aggregate remains embedded in the concrete, or after they are impregnated with the DS series impregnator, then the excess aggregate will be glued to the surface of the slab.

▫️ Before installation, check the entire batch of slabs and plan the distribution of individual slabs and the order of their assembly by choosing slabs from different places on the palette to preserve the natural appearance of the wall.

▫️ For demonstration purposes, the slabs in the photos, from the implementation and visualizations are shown in different color versions. To make a color selection based on actual colors, we suggest purchasing a concrete slab sample book

▫️ The colors displayed on customer monitor screens may differ from the actual color due to discrepancies in the matrices and calibration of the displays.

▫️ The slabs may have cast residues on the edges, which the assembly team should sand down before laying the slabs on the wall.

▫️ Please note that our boards may contain visible polymer fibers which are used to increase their strength. The appearance of these fibers, also on the surface of the board visible after gluing, is not considered a defect, but is a natural result of the production process. Therefore, their presence does not authorize the submission of complaints, as they are an integral feature of this product.

WN_DS/2D/grafitowy_czarne_krusz/60x60/SP

Data sheet

Slab series
(2D) DS series
Dimensions
60x60 cm
Material
Concrete
Structure
HAP (porous)
Porosity
Medium
Color
Graphite
Decoration
Black particles
Weight
30x60 cm ~ 3 kg
60x60 cm ~ 6 kg
100x50 cm ~ 8 kg
120x60 cm ~ 12 kg
Type of reinforcement
PRC
Purpose
Indoor
Outdoor
Resistance
Fire-resistance
Frost-resistance
Water-resistance (after impregnation)
Thickness
1 cm
For facades
Yes (after impregnation)
To kitchen
Yes (after impregnation)
To the fireplace
Yes (with the use of appropriate glue)
To bathroom
Yes (with the use of impregnation and flexible grout)
On the floor
No
Impregnation
No
Custom dimensions
No
Factory cutting to size
No
Trimming by the customer
Yes (dry trimming with diamond tools)
Drilling by customer
Yes (drill without hammer)
Cutting holes by the customer
Yes (with diamond hole saw)
I'M ORDERING
PRODUCT

1. Enter data

Enter wall dimensions and desired slab orientation and we will calculate required amount of slabs and assembly chemicals for You.

Enter wall dimensions

Enter slab parameters

VT Series

Architectonic concrete - smooth or medium porosity.


płyta beton architektoniczny seria vt

  •  ORDER FULFILLMENT: 7-10 business days
  •  5 YEARS WARRANTY(with the use of dedicated assembly chemistry)

12 shades of 2D slabs in wide range of 17 sizes (wall and floor). It's characterized by high frost and flame resistance. Perfect for interiors, as well as facades, floors and terraces.


Available sizes:

  • 30x60x1 cm
  • 60x60x1 cm, 60x60x2 cm
  • 80x40x1 cm, 80x40x1,5 cm
  • 90x45x1 cm 
  • 90x55x1 cm
  • 100x50x1 cm, 100x50x2 cm  
  • 100x100x2 cm
  • 120x60x1 cm, 120x60x2 cm, 120x60x3 cm
  • 120x80x2 cm, 120x80x3 cm
  • 150x60x2 cm, 150x60x3 cm



Link to the entire series of VT 2D products in store: (VT Series (2D))
Additionally, 40 patterns of 3D Boards in 10 shades - fulfillment time: 7-10 business days
Link to the entire series of VT 3D products in store: (VT Series (3D))



DS Series

Architectonic concrete with medium or high porosity.


płyta beton architektoniczny seria ds

  •  ORDER FULFILLMENT: 14-21 business days
  •  8 basic colors in two porosities (white, light gray, dark gray, anthracite, brown, cappuccino, graphite, green)
  •  3 particle colors in two porosities (gold, silver, black)
  •  7 colors of corten (white, gray, anthracite, graphite, cappuccino, brown, green (patina))

The DS series is handcrafted and the concrete features a very strong PRC-reinforced structure.

Series attributes:

  • Frost-resistant
  • Flame-resistant
  • For interiors and facades
  • Easy installation


Available sizes:

  • 30x60x1 cm
  • 60x60x1 cm
  • 100x50x1 cm
  • 120x60x1 cm




Link to the entire series of DS products in store: (DS Series)



LS Series

Architectonic concrete with medium porosity.


płyta beton architektoniczny seria ls

  •  ORDER FULFILLMENT: 3-9 business days for standard sizes of slabs and 14-30 business days for non standard sizes of slabs.
  •  4 basic colors in a medium porosity resembling a poured concrete ceiling (white, light gray, dark gray, anthracite).

The LS series is handcrafted and the concrete has a very strong GRC (Glass-fiber Reinforced Concrete) structure in the case of 1 cm thick slabs. In the case of 2 cm and thicker slabs, PRC (Polypropylen-fiber Reinforced Concrete) reinforcement is used.

Series attributes:

  • Frost-resistant
  • Flame-resistant
  • For interiors and facades
  • Easy installation


Available sizes:

  • 60x60x1 cm
  • 100x50x1 cm
  • 120x60x1 cm
  • 150x60x1 cm

  • 59,5x59,5x2 cm
  • 119,3x59,5x2 cm 
  • 149,2x59,5x2 cm

  • In addition, we cast panels of any size in the range 10x10 cm - 246x121 cm with a thickness of 1 to 8 cm.




Link to the entire series of LS products in store: (LS Series)



Summary

Basic differences between slab series.

VT Series

DS Series

LS Series

Available concrete colors

12

8

4

Available sizes

17

4

3 basic + molded to size 

Slab thickness

1-3 cm

1 cm

1-3 cm

Order fulfillment [business days]

7-10

14-21

3-9 + 14-30

Porosity

Smooth / Medium

Medium / High

Medium

Cutting to size

Yes

No

No

Crafting method

Machine

Handcrafted

Handcrafted

Type of reinforcement

Chemical

PRCG

GRC / PRC

Custom dimensions

No

No

Yes

-

-

-

-



Download

Slab specification - DS series

Technical sheet, specification, assembly instructions [PDF]

Download (213.25k)

You might also like

Related Products (There are 8 other products in the same category)

close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password