DS (anthracite with silver particles) - architectural concrete slab ultralight
PRC concrete slabs are available in 1 cm of thickness, which allows you to mount them in any way available on the market.
Professional customer service
Secure delivery sent directly to you
Architectural concrete slabs of the DS series, reinforced with PRC fiber.
The main features of the product
30x60 cm - approx. 3 kg,
60x60 cm - approx. 6 kg,
100x50 cm - approx. 8 kg,
120x60 cm - approx. 12 kg.
Purpose: walls / facades / fences / fireplaces
Concrete slabs can be used both inside and outside buildings as a form of elevation. In combination with various patterns of 3D panels available in our store (see products), you can create unique and modern interiors and facades of buildings. Boards can also be successfully placed on fences and fireplaces can be covered with them due to their fire resistance.
Two types of porosity
Medium, characterized by small, round holes made of aerated concrete of thin consistency, occurring evenly over the entire slab.
A large one with larger, irregular holes resulting from the use of a denser concrete mix. They appear unevenly, so fragments without holes or with a smaller number of holes may appear on the plate. It is the result of manual concrete mashing in the molds.
Architectural concrete PRC (Polymer Fiber Reinforced Concrete), from which the slabs are made, is concrete reinforced with polymer fiber. Thanks to this structure, the manufactured boards can be 1 cm thick, maintaining the strength and durability of two or three times thicker concrete slabs produced with traditional methods. Compressive strength - strength class C20 / 22. Reaction to fire - class A1.
Three colors of aggregate
Golden / Silver / Black - depending on the porosity of the slab, the aggregate is placed on it in a different way.
In the case of a plate with medium porosity, the aggregate is spread flat and evenly on the surface, shining at one angle.
In the case of high porosity of the slab, the aggregate is collected in a larger amount locally, which causes it to glow at many angles. Looking at the plate from each side, you can see reflections of light reflecting off the aggregate particles.
Depending on the room in which we want to use the boards, they should be properly impregnated. For this purpose, we recommend using an impregnation from our offer (impregnation - buy the product).
In addition, we offer factory-impregnated slabs for even greater convenience and speed of assembly.
Processing concrete slabs from the DS series
Cutting to size
Our slabs can be easily cut to the desired size using diamond discs for concrete. You can use an ordinary angle grinder or a circular saw for this purpose. Cutting should be done dry, without the use of water.
By using drill bits and holesaws for concrete, mounting holes for sockets or TV brackets can be made in the panels. All holes must be drilled without impact.
Easy and cheap installation
The 1 cm thickness of the boards simplifies the assembly procedure, all you need is DS series polyurethane foam available in our store (it does not require fixing anchors, additional reinforcements or other stabilizers in the case of internal walls). The boards can be mounted to OSB, MDF or GK boards if we do not want to sand the substrate with paint and putty. The gypsum substrate is not suitable for direct bonding of architectural concrete.
The complete, detailed assembly and storage instructions are available for download.
2-year warranty for damage after installing the panels (cracks, deformations, falling off the wall) using the dedicated assembly kit listed below in accordance with the assembly instructions.
Necessary mounting accessories
Now you are probably wondering how many boards and accessories you need for your project?
Use the calculator designed for a comprehensive selection of all necessary materials.
Step 1 - Enter the dimensions of the wall
The calculator will calculate, on their basis, the number of plates needed for installation and the necessary accessories. Then select, from the available plate sizes, the plate size and either a landscape or portrait orientation.
Step 2 - see the proposed arrangement of the boards on the wall
The calculator takes into account the cutting of up to two elements with a factory-cast edge from one plate. You will be offered the number of plates along with the necessary accessories for assembly.
Step 3 - add products to the cart
After entering the cart, you will receive additional information on the cost of delivery.
Thanks to the one-step shopping cart, the ordering process is very simple and fast. In one window, you will provide shipping data, invoices, and choose transport and payment methods, and you will finish the whole thing with fast payments by Przelewy24.pl or by traditional transfer.
For the installation of concrete panels, it is recommended to use dedicated accessories also available in our store. Possible factory deviations of architectural concrete slabs should be reported prior to installation.
Due to the characteristics of architectural concrete, differences in the number and size of pits on the surface of individual slabs are possible. Color and dimensional discrepancies (+/- 3 mm) are also allowed.
The aggregate on the slab surface is laid naturally while the concrete is poured into the molds. The aggregate is arranged differently on each slab, therefore the arrangement should be planned by placing the slabs on the floor before sticking them to the wall.
Aggregate in the version of plates with high porosity may fall off the plates due to its excess in the production process. The sprinkling stops after the slabs are vacuumed, then the aggregate remains embedded in the concrete or after impregnating them with the DS series impregnation, then the aggregate surplus will be glued to the slab.
Before installation, check the entire batch of tiles and plan the distribution of individual boards and the sequence of their assembly by selecting boards from different places on the pallet to maintain the natural appearance of the wall.
For demonstration purposes, the slabs in the photos, realizations and visualizations are shown in various color versions. To make a color selection based on actual colors, we suggest purchasing the concrete slab sampler.
The displayed colors on customer monitor screens may differ from the actual color due to the discrepancy of matrices and the calibrations of the displays.
The boards may have cast remnants on the edges, which the assembly team should grind down before laying the boards on the wall.
- Slab series
- (2D) DS series
- 120x60 cm
- HAP (porous)
- Silver particles
- 30x60 cm ~ 3 kg
60x60 cm ~ 6 kg
100x50 cm ~ 8 kg
120x60 cm ~ 12 kg
- Type of reinforcement
Water-resistance (after impregnation)
- 1 cm
- For facades
- Yes (after impregnation)
- To kitchen
- Yes (after impregnation)
- To the fireplace
- Yes (with the use of appropriate glue)
- To bathroom
- Yes (with the use of impregnation and flexible grout)
- On the floor
- Custom dimensions
- Factory cutting to size
- Trimming by the customer
- Yes (dry trimming with diamond tools)
- Drilling by customer
- Yes (drill without hammer)
- Cutting holes by the customer
- Yes (with diamond hole saw)
- I'M ORDERING
2. Calculation results
Based on your data we calculated required amounts of slabs and dedicated chemicals.
Ground: Brak informacji
Glue: Brak informacji
Leveling system: Brak informacji
Impregnation: Brak informacji
3. Buy now
To make purchase process even simpler, we prepared list of all required products for You. You can choose preferred accessories and add them all to cart with one click, using "Add to cart" button.
|Name||Needed quantity||Unit price||Total price|
Architectonic concrete - smooth or medium porosity.
- ORDER FULFILLMENT: 7-10 business days
- 5 YEARS WARRANTY(with the use of dedicated assembly chemistry)
12 shades of 2D slabs in wide range of 17 sizes (wall and floor). It's characterized by high frost and flame resistance. Perfect for interiors, as well as facades, floors and terraces.
- 30x60x1 cm
- 60x60x1 cm, 60x60x2 cm
- 80x40x1 cm, 80x40x1,5 cm
- 90x45x1 cm
- 90x55x1 cm
- 100x50x1 cm, 100x50x2 cm
- 100x100x2 cm
- 120x60x1 cm, 120x60x2 cm, 120x60x3 cm
- 120x80x2 cm, 120x80x3 cm
- 150x60x2 cm, 150x60x3 cm
Link to the entire series of VT 2D products in store: (VT Series (2D))
Architectonic concrete with medium or high porosity.
- ORDER FULFILLMENT: 14-21 business days
- 8 basic colors in two porosities (white, light gray, dark gray, anthracite, brown, cappuccino, graphite, green)
- 3 particle colors in two porosities (gold, silver, black)
- 7 colors of corten (white, gray, anthracite, graphite, cappuccino, brown, green (patina))
The DS series is handcrafted and the concrete features a very strong PRC-reinforced structure.
- For interiors and facades
- Easy installation
- 30x60x1 cm
- 60x60x1 cm
- 100x50x1 cm
- 120x60x1 cm
Link to the entire series of DS products in store: (DS Series)
Basic differences between slab series.
Available concrete colors
Order fulfillment [business days]
Smooth / Medium
Medium / High
Cutting to size
Type of reinforcement