LD (walnut) free-standing lamella wall - 3D openwork arrangement

zł689.99

(zł491.96 / m2)

Tax included
Change your interior and divide room zones with decorative openwork walls made of LD wooden slats.
I'M ORDERING
Type
Module
Wall size
Color:

Classic walnut

Quantity
czas realizacji Order fulfillment time: 10-14 business days

 

Professional customer service

 

Secure delivery sent directly to you

orzech_klasyczny_scianka1.jpg

A ready-made partition wall made of free-standing lamellas is a modern way to create zones in rooms.

The wall we sell is a complete kit for self-assembly, containing all the elements needed to quickly and easily erect a partition wall. We have a choice of 26 wall widths, so we are able to match it to almost any interior.

The set includes:

  • drilled vertical lamellas (ready to assembly),
  • drilled horizontal slats (ready to assembly),
  • wooden mounting studs,
  • confirmates,
  • plugs,
  • installation instructions.

Specification

Material: MDF veneered on four sides.
Dimensions of individual lamellas: 30 x 70 mm (W x D).
Lamella spacing: 50 mm wide gap.
Wall dimensions: 26 sizes in the range 51-251 cm to be selected from the WALL SIZE drop-down list.
It is cut to any height. It should be remembered that the total height of the wall should be 0.5 cm lower than the height of the room.
The slats are not suitable for wet rooms and outdoors.

The LD series lamellas are made of MDF board covered with high-quality veneer, which guarantees long-term durability of the product. The veneers used are of the highest class, distinguished by a noticeable, embossed wood structure, which provides even better visual effects and makes the lamellas more authentic. In the case of oak veneer, the effect is even better and the slats look like they come from oak planks.

orzech_scianka_.jpg
orzech_klasyczny_scianka2.jpg

Acoustic properties

Thanks to the soundproofing properties, the lamellas are perfect for rooms such as living rooms, bedrooms, home cinemas and studio rooms. They work very well as bass traps and echo spreaders in rooms.

Optical properties

The vertical form of the product makes the lamellas optically enlarge the space.

Simple and invisible mounting system

All lamellas have pre-drilled holes for mounting screws. In addition, the two extreme lamellas have mounting pins which, after fixing, cover the places where the side lamellas are joined.


More information on this subject can be found in the ASSEMBLY INSTRUCTIONS.

montaz_.jpeg

AVAILABLE COLORS

Check all available colors and find something for yourself!

NATURE OAK

NATURE OAK

WHITE

WHITE

OAK VENEER

OAK VENEER

MORE...

MORE...

WN_LD/scianka_lameli/szer_51cm/orzech_klasyczny

Data sheet

Dimensions
275x51x7 cm
Material
MDF
Color
Classic walnut
Type
Board
Wall made of free-standing lamellas
Purpose
Indoor
Soundproofing properties
Yes
For walls
Yes
To living room
Yes
For commercial and service premises
Yes
Factory cutting to size
Yes (after extra fee)
Trimming by the customer
Yes
For office
Yes
Color [LD]
Classic walnut
I'M ORDERING
PRODUCT
Wall size
51 cm (7 lamellas)

ASSEMBLY INSTRUCTIONS FOR THE LAMEL WALL

1. Place all the wall elements on the floor.

2. Using confirmats, screw the vertical lamellas to the horizontal lamellas. The two longer edge lamellae will be fitted at a later stage.

3. Apply the mounting adhesive on the floor in the previously designated place where the target wall will stand.

4. Place a wall in a designated place and check the plumb.

5. Drill holes for mounting pins in the upper lamella and the ceiling.

6. Screw the wall to the wall plugs in the ceiling. (wall plugs are not included in the set).

7. Install the side lamellas using wooden pins and glue.

You might also like

Related Products (There are 8 other products in the same category)

close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password