Change your interior with decorative ready-made panels, containing wooden wall lamellas of the LD Slim series mounted on black felt with a thickness of 8mm.
Acoustic wooden wall lamellas on a 8mm thick felt panel.
Meet the decorative lamellas from the LD Slim series - the highest quality wall lamellas with unique aesthetics, a wide range of available colors and excellent acoustic properties. Give your interior a character with LD lamellas. The option with a felt panel 8 mm thick will guarantee even better acoustic properties of the lamellas and will also facilitate the assembly process.
Main product features:
Aesthetics and careful workmanship The highest standards are maintained during production - not only in terms of quality, but also visually.
A wide range of colors LD lamellas are available in 7 colors, so you will surely find the perfect color for you.
Easy and cheap installation Installation of wall lamellas is a very easy and cheap undertaking, it is enough to apply glue from the tube in vertical strips every 10 cm and press the panel with lamellas to the wall.
Acoustic properties Thanks to the soundproofing properties, the slats are perfect for rooms such as bedrooms, home cinemas and studio rooms.
Optical properties The vertical form of the product makes the lamellas optically enlarge the space.
2 YEARS WARRANTY For all products from the LD series in compliance with assembly instructions .
Specification:
Material : LD lamellas are made of MDF board covered with high-quality veneer, which guarantees long-term durability of the product. The veneers used are of the highest class, distinguished by a noticeable embossing wood structure , which provides even better visual effects and makes the slats more authentic.
Dimensions of the slatted panels : - length: 275 cm, - width: 30 cm, - depth: 2.6 cm (including 8 mm thick black felt), - we can also cut the lamellas to size, click: LD LAMELLAS CUTTING SERVICE.
Spacing : - each panel ends with a protruding element made of felt, to connect them without a visible joint, just push one panel to the other and press it against the wall with glue. Thanks to the felt base, the joining of the panels will be invisible.
Where to use decorative lamellas?
Decorative lamellas will fit perfectly in almost any modern interior. They blend in perfectly with architectural concrete , natural stone or wood. The use of contrasting colors of the lamellas perfectly emphasizes the character of the interior and exposes the surfaces selected by us, thanks to which they are widely used in bedrooms and living rooms, commercial spaces, offices and exhibitions.
Thanks to their soundproofing properties , the lamellas are also used in rooms where acoustics play a key role - in bedrooms , cinemas home , studio rooms or conference rooms .
Lamels can be used not only on walls - they will also work well on ceilings or furniture.
Veneer
3-sided taped with an overlap The veneer in our lamellas is wrapped around on each side, unlike cheaper solutions available on the market, in which it is either not visible on the sides or sides they are glued from another piece of veneer so you can see the veneer joints at the corners of the lamellas.
Available colors
Check all available colors!
Graphite
Wotan oak
Black
Sonoma oak
Walnut
Natural oak
More
We send the lamellas 275 cm long for self-cutting. It is a simple miter sawing process, as is the case with any wood material.
Mark the plumb line with a spirit level and mark it on the wall.
Apply MAMUT assembly glue or TESA tape No. 4957 to the felt panel cut to the desired height.
Glue the firstpanel according to the previously marked plumb line.
Put more panels next to each other until we get the desired width.
Cut the last felt panel lengthwise with a carpet knife, if necessary.
In the case of mounting the panels on the ceiling, you can additionally use black screws between the slats.
Cutting lamella on felt
Cutting the slats to width:
Cut the panel with a sharp wallpaper knife. We recommend cutting along the last lamella desired on the wall, thanks to which you will get a straight cut line and an aesthetic finish on the wall.
Cutting the lamellas to length:
Place the panel between two pieces of the board using the clamps and with a sharp knife cut out the felt in the marked place.
We remove the staples and the cut off piece of felt.
Cut the lamellas with a manual wood saw.
The lamellas can also be cut with a circular saw. In this case, you do not need to cut the felt separately with a knife.
Grade
Lolek2022-04-03
A ja przykleiłem na drzwi :D Rewelka !
Grade
Daniel2022-03-27
Ładnie wyglądają jako dodatek do ściany z betonu. Polecam !
Grade
Ilona Stygacz2022-03-05
mam w salonie i są bardzo estetyczne. Kolorem jestem zachwycona.