Sampler for LD lamellas free-standing
zł29.99
The sampler contains 6 color versions of double-sided lamellas.
(zł491.96 / m2)
Professional customer service
Secure delivery sent directly to you
The wall we sell is a complete kit for self-assembly, containing all the elements needed to quickly and easily erect a partition wall. We have a choice of 26 wall widths, so we are able to match it to almost any interior.
The set includes:
Material: MDF veneered on four sides.
Dimensions of individual lamellas: 30 x 70 mm (W x D).
Lamella spacing: 50 mm wide gap.
Maximum wall height up to 275 cm.
Wall dimensions: 26 sizes in the range 51-251 cm to be selected from the WALL SIZE drop-down list.
It is cut to any height from the range 135-275 cm. It should be remembered that the total height of the wall should be 0.5 cm lower than the height of the room.
The slats are not suitable for wet rooms and outdoors.
The LD series lamellas are made of MDF board covered with high-quality veneer, which guarantees long-term durability of the product. The veneers used are of the highest class, distinguished by a noticeable, embossed wood structure, which provides even better visual effects and makes the lamellas more authentic. In the case of oak veneer, the effect is even better and the slats look like they come from oak planks.
Acoustic properties
Thanks to the soundproofing properties, the lamellas are perfect for rooms such as living rooms, bedrooms, home cinemas and studio rooms. They work very well as bass traps and echo spreaders in rooms.
Optical properties
The vertical form of the product makes the lamellas optically enlarge the space.
All lamellas have pre-drilled holes for mounting screws. In addition, the two extreme lamellas have mounting pins which, after fixing, cover the places where the side lamellas are joined.
More information on this subject can be found in the ASSEMBLY INSTRUCTIONS..
Check all available colors and find something for yourself!
Data sheet
1. Place all the wall elements on the floor.
2. Using confirmats, screw the vertical lamellas to the horizontal lamellas. The two longer edge lamellae will be fitted at a later stage.
3. Apply the mounting adhesive on the floor in the previously designated place where the target wall will stand.
4. Place a wall in a designated place and check the plumb.
5. Drill holes for mounting pins in the upper lamella and the ceiling.
6. Screw the wall to the wall plugs in the ceiling. (wall plugs are not included in the set).
7. Install the side lamellas using wooden pins and glue.