Stabilizing primer with quartz sand DS
DS Stabilizing primer with quartz sand.
(zł266.61 / m2)
PRC concrete slabs are available in 1 cm of thickness, which allows you to mount them in any way available on the market.
Professional customer service
Secure delivery sent directly to you
30x60 cm - approx. 3 kg
60x60 cm - approx. 6 kg
100x50 cm - approx. 8 kg
120x60 cm - approx. 12 kg
Purpose: walls / facades / fences / fireplaces
Concrete slabs can be used both indoors and outdoors as a form of the facade. In combination with various patterns of 3D panels available in our store (see products), you can create unique and modern interiors and building facades. The slabs can also be successfully laid on fences and fireplaces due to their fire resistance.
Two types of porosity
Medium, characterized by small, round holes resulting from the air-entrainment of concrete with a thin consistency, evenly distributed over the entire slab.
Large, which has larger, irregular holes, resulting from the use of a denser concrete mix. They occur unevenly, which may result in fragments without holes or with fewer of them. This is the result of the manual trowelling of concrete in forms.
Architectural concrete PRC (Polymer Fiber Reinforced Concrete), from which the slabs are made, is concrete reinforced with polymer fiber. Thanks to this structure, the produced slabs can be 1 cm thick, maintaining the strength and durability of two or three-times thicker concrete slabs produced using traditional methods. Compressive strength - strength class C20/22. Reaction to fire - class A1.
Three colors of aggregate
Gold / Silver / Black - depending on the porosity of the slab, the aggregate is arranged on it in a different way.
In the case of a slab with medium porosity, the aggregate is distributed flat and evenly on the surface, shining at one angle.
In the case of a slab with high porosity, the aggregate is collected in a larger amount locally, which makes it shine at many angles. Looking at the slab from each side, you can see reflections of light reflecting off the aggregate particles.
Depending on the room in which we want to use the slabs, they should be properly impregnated. For this purpose, we recommend using an impregnation from our offer (impregnation - buy the product).
For slabs with high porosity, it is recommended to use an impregnation for surface gluing of the aggregate, so that the production surplus of decorative elements is merged on the surface of the slabs.
In addition, we offer factory-impregnated slabs options for even greater convenience and speed of installation. Just select this option from the drop-down list of available product combinations.
Cutting to size
Our slabs can be easily cut to the desired size using diamond discs for concrete. You can use a regular angle grinder or a circular saw for this purpose. Cutting should be done dry without the use of water.
Using drills and hole saws for concrete, mounting holes for sockets or TV brackets can be made in the slabs. All holes must be drilled without hammering.
Easy and cheap assembly
The thickness of the slabs, 1 cm, simplifies the installation procedure, all you need is polyurethane foam from the DS series available in our store (does not require anchors, additional reinforcements or other stabilizers in the case of internal walls). The slabs can be mounted to OSB, MDF or GK slabs if you do not want to sand the paint and putty on the substrate. The gypsum substrate is not suitable for direct bonding of architectural concrete.
The complete, detailed installation and storage instructions after delivery are available for download here.
2-year warranty against damage after installing the slabs, using a dedicated mounting kit, listed in the "necessary mounting accessories" section.
Cracks, deformations, and falling off the wall - may occur if the recommended accessories are not used.
Read the assembly instructions before starting any assembly work.
Step 1 - enter the dimensions of the wall
The calculator will calculate, based on them, the number of panels and accessories needed for installation. Then, from the available slab sizes, select the slab size and the horizontal or vertical orientation.
Step 2 - see the proposed arrangement of slabs on the wall
The calculator takes into account cutting up to two elements with a factory-cast edge from one slab. You will be offered the number of slabs along with the necessary accessories for assembly.
Step 3 - add products to the cart
After going to the cart, you will receive additional information on delivery costs.
Thanks to the one-step shopping cart, the ordering process is very simple and fast. In one window, you will enter shipping data, and invoices, choose the transport and payment method, and finish the whole process with fast payments by Przelewy24.pl or a traditional transfer.
▫️ For the installation of concrete panels, it is recommended to use dedicated mounting accessories also available in our store.
▫️ Possible factory deviations of architectural concrete slabs should be reported before installation.
▫️ Due to the characteristics of architectural concrete, differences in the number and size of pits on the surface of individual slabs are possible. Color and dimensional discrepancies (+/- 3 mm) are also allowed.
▫️ Aggregate on the surface of the slab is arranged naturally when pouring concrete into the forms. On each slab, the aggregate is laid in a different way, so you should plan the arrangement by spreading the slabs on the floor before gluing them to the wall.
▫️ Aggregate in the version of slabs with high porosity may fall off the slabs due to its excess in the production process. The scaling stops after the slabs are vacuumed, then the aggregate remains embedded in the concrete, or after they are impregnated with the DS series impregnator, then the excess aggregate will be glued to the surface of the slab.
▫️ Before installation, check the entire batch of slabs and plan the distribution of individual slabs and the order of their assembly by choosing slabs from different places on the palette to preserve the natural appearance of the wall.
▫️ For demonstration purposes, the slabs in the photos, from the implementation and visualizations are shown in different color versions. To make a color selection based on actual colors, we suggest purchasing a concrete slab sample book.
▫️ The colors displayed on customer monitor screens may differ from the actual color due to discrepancies in the matrices and calibration of the displays.
▫️ The slabs may have cast residues on the edges, which the assembly team should sand down before laying the slabs on the wall.
Enter wall dimensions and desired slab orientation and we will calculate required amount of slabs and assembly chemicals for You.
Based on your data we calculated required amounts of slabs and dedicated chemicals.
To make purchase process even simpler, we prepared list of all required products for You. You can choose preferred accessories and add them all to cart with one click, using "Add to cart" button.
|Name||Needed quantity||Unit price||Total price|
Architectonic concrete - smooth or medium porosity.
12 shades of 2D slabs in wide range of 17 sizes (wall and floor). It's characterized by high frost and flame resistance. Perfect for interiors, as well as facades, floors and terraces.
Architectonic concrete with medium or high porosity.
The DS series is handcrafted and the concrete features a very strong PRC-reinforced structure.
Link to the entire series of DS products in store: (DS Series)
Architectonic concrete with medium porosity.
The LS series is handcrafted and the concrete has a very strong GRC (Glass-fiber Reinforced Concrete) structure in the case of 1 cm thick slabs. In the case of 2 cm and thicker slabs, PRC (Polypropylen-fiber Reinforced Concrete) reinforcement is used.
Link to the entire series of LS products in store: (LS Series)
Basic differences between slab series.
Available concrete colors
3 basic + molded to size
Order fulfillment [business days]
3-9 + 14-30
Smooth / Medium
Medium / High
Cutting to size
Type of reinforcement
GRC / PRC