Minimalistic profiles providing discreet and innovative connection between floor and a wall, window, stairs or any desired surface. It will fit perfectly wherever, from the visual point of view, there is a need to make transitions and finishes of subtle and elegant floors.
Main product features:
Minimalistic, tidy and aesthetic
Quick & easy fitting - without tools, dirt and mess free
Perfect match for wooden and concrete surfaces, as well as parquetes and tiles
Aluminium build ensures durability, water resistance and prevents swelling
Universal design - subtle finishing touch for each interior
High scratch and wear resistance - can be used in both, home and commercial interiors
Price for one profile - 2 meters running
Available in 4 color versions
Product innovation has been awarded with a prestigous Red Dot Award
Floors are a basic architectonical element. The way they are finished has major impact on how whole interior is perceived.
Finishing profiles Minileiste offer completely new approach to transitions - thoughtful design allows for almost perfectly flat transition between almost any surfaces, not only floor and a wall. High quality materials used in production of our profiles ensures very long life span of the product.
Minileiste profiles stand out not only because of their quality and aesthetic aspect, but primarly due to simplicity of the installation process, not requiring any specific tools - without drilling, hammering or screwing.
Fitting process can be divided in 8 simple steps:
The gap width, depending on the selected model, should be 5 - 8 mm or 5 - 13 mm. The thickness of the floor covering should also be taken into account. Our skirting boards can be used from the minimum thickness of 5 mm.
Get the desired cut dimensions from the wall surface. Include miter cuts at inside and outside corners.
Cut profiles to size. Miter cutting of an inside or outside corner is performed in one operation. The cutting direction of the saw presses the profile against the wooden support during the cutting process.
Insert the mounting clips on the side of the profile. Note: There are two opposite arms built into the strip, between which mounting clips can be easily led.
Klipsy montażowe należy umieścić w odległości około 30 do 60 cm od siebie. W zależności od nierówności ściany, poszczególne klipsy montażowe można montować w bliższych odstępach, tak aby listwa była wyrównana z murem.
Mounting clips should be placed approximately 30 to 60 cm apart. Depending on the unevenness of the wall, individual mounting clips can be installed at closer intervals so that the strip is flush with the wall.
Press the profile against the floor and repeat the assembly process until all strip clips are tight and sunk. The strip can be removed at any time in order to make any corrections.
Profile has been successfully installed. After a short check, the next section can be fitted.
200 x 2 x 0,1 cm
Flat (10 mm) - 106 g Flat (16 mm) - 142 g Skirting - 256 g Transition - 154 g
Minimal covering thickness
Minimal gap height
Flat (10 mm): 5 - 8 mm Flat (16 mm): 5 - 13 mm Skirting: 5 - 13mm Transition: 5 - 13 mm