Steel decorative strips for ceramic and concrete tiles from the SM series are a modern and original way of decorating the walls. They are characterized by careful workmanship of the highest quality materials, aesthetics, and high resistance to moisture, thanks to which they will be perfect in the kitchen or bathroom. In addition, a wide range of colors makes them ideally suited to almost any decor.
SM decorative strips are a durable and aesthetic solution for people who pay attention to details. They give the opportunity to subtly emphasize the concrete or ceramic plates placed on the wall, as well as a contrasting finish that immediately draws attention to the entire composition.
The definitive advantage of using decorative strips is the extremely simple installation - the entire process is limited only to fusing the strip into the tile adhesive or sticking it in the desired place with mounting glue.
Decorative strips are perfect for any room. They are available in four universal colors, each of which is available in both matt and gloss versions. Thanks to their high scratch resistance, they can be used in rooms exposed to mechanical damage, such as commercial and office spaces, and the resistance to moisture makes the boards safe to use in rooms such as bathrooms or kitchens.
Check all available colors!
Data sheet
The matt finish of the steel decorative strips is brushed, which gives them a subtle, elegant look and delicate texture. This makes the surface of the strip more resistant to scratches and fingerprints compared to smooth, glossy surfaces.
Steel decorative strips come in various profiles and dimensions to suit different needs. We offer three main types of profiles:
The lengths of the strips are most often up to 270 cm, which is the standard maximum length in the offer.
Yes, steel decorative strips are weatherproof, so they can be used both inside and outside buildings. The strips are thermal and waterproof, which makes them perfect for more difficult environmental conditions, such as facades, terraces or gardens.
Steel decorative strips can be attached in several ways, depending on the surface and installation requirements:
Good to know:
Before mounting, make sure the surface is clean, dry and degreased to ensure the best possible adhesion of the strip.
Steel decorative strips can be cut to size using the right tools. The best tools for cutting steel include:
Tips:
Your steel decorative strips probably arrived with a protective film. In order to protect the strips during transport, their decorative side is covered with a special film that may distort the actual colour of the strip. To see the correct colour, you should gently remove the protective film.
It is worth remembering:
We encourage you to carefully remove the film after installation to avoid accidentally scratching the surface.
Yes, you can insert steel decorative strips into decorative plaster to create an aesthetic finish. Here's how:
It depends on the finish of the skirting board. Skirting boards with a glossy finish are more susceptible to fingerprints and marks, as their smooth, mirror-like surface attracts dirt more easily. Skirting boards with a matte, brushed finish are less susceptible to fingerprints and leave fewer visible marks thanks to their subtle texture.
Good to know:
Currently 270 cm is the maximum length of our steel decorative strips.
We do not offer longer strips, but if necessary, you can connect several sections to obtain the right length for your project.
Currently, we only sell steel decorative strips in standard lengths and do not offer the option of cutting to size. However, the strips can be easily cut to size yourself using metal cutting tools such as a hacksaw or angle grinder.
Our decorative strips do not have references to the RAL palette. The colors are unique and anodized, which gives them a specific look not directly related to the RAL system.
Our decorative strips are available in four colors:
Each of these colors is available in both matt and gloss versions.
The decorative strips are carefully secured and shipped in a cardboard tube. To further protect them during transport, the tube is reinforced with a wooden profile. The decorative part of the strip is covered with a protective film, which must be removed after installation.
The order fulfillment time for steel decorative strips is usually 3 to 7 working days, depending on product availability and the number of pieces ordered. The exact delivery date can be checked on the product page when placing the order.
Yes, our steel decorative strips can be successfully used to cover furniture fronts. Their elegant design and durability make them perfect for this type of application. The strips can also be used to decorate other surfaces, such as walls, mirror frames or interior details.
Just remember to use the right assembly adhesives to ensure permanent attachment of the strips to the furniture.
Yes, our steel decorative strips are made of 0.6 mm thick material, which makes them flexible and can be used on slightly curved surfaces. Thanks to their thin construction, they easily adapt to various projects, while maintaining durability and aesthetics.
No, our steel decorative strips are waterproof and corrosion-resistant, thanks to the anodizing process. This process provides them with permanent protection against rust, which means they can be used both indoors and outdoors, without worrying about their durability and appearance.
Our steel decorative strips are made of anodized steel, which makes them durable, corrosion resistant and elegant. The anodizing process gives them additional protection and makes them resistant to moisture and mechanical damage.
Yes, our steel decorative strips can be successfully used in the kitchen. Thanks to their moisture resistance and durability, they are perfect for places exposed to water and temperature changes. Additionally, anodizing provides protection against corrosion, making them an ideal solution for kitchen arrangements.
Our steel decorative strips are 0.6 mm thick. This makes them both durable and flexible, which allows them to be easily adapted to different surfaces.
Our steel decorative strips are available in widths from 10 mm to 50 mm, depending on the profile you choose. You can choose from a variety of shapes and sizes to match your project.
