DS (gray corten) - architectural concrete slab ultralight
zł164.99
Tax included
PRC concrete slabs are available in 1 cm of thickness, which allows you to mount them in any way available on the market.

Professional customer service

Secure delivery sent directly to you

The main features of the product
Light
100x50 cm - approx. 8 kg.
Frost-resistant
Fireproof
Purpose: walls / facades / fences / fireplaces
Concrete slabs can be used both inside and outside buildings as a form of elevation. In combination with various patterns of 3D panels available in our store (see products), you can create unique and modern interiors and facades of buildings. Boards can also be successfully placed on fences and fireplaces can be covered with them due to their fire resistance.
Properties
The model of CORTEN slabs, covered with real rust imitating Corten steel, has a decorative decorative motif on the surface, which in different lighting brings out unique visual qualities from the slabs thanks to a three-dimensional texture.
This gives the wall a much more natural and pleasant effect than in the case of wallpapers or porcelain tiles with a printed pattern.
Each slab has a different and unique rust pattern on the surface, which is its advantage. The Corten version is produced only in the size 100x50x1 cm.
Resilience
Architectural concrete PRC (Polymer Fiber Reinforced Concrete), from which the slabs are made, is concrete reinforced with polymer fiber. Thanks to this structure, the manufactured boards can be 1 cm thick, maintaining the strength and durability of two or three times thicker concrete slabs produced with traditional methods. Compressive strength - strength class C20 / 22. Reaction to fire - class A1.


![]()
Impregnation
In the case of corten boards, they must be impregnated before laying. The only impregnation method for these boards is spraying, because a roller or a brush will smear the rust that is on the surface of the board and it will not be possible to restore its original appearance. For this purpose, we recommend using an impregnation from our offer (impregnation - buy the product).
In addition, we offer factory-impregnated slabs for even greater convenience and speed of assembly.
Necessary mounting accessories
Processing concrete slabs from the DS series
Cutting to size
Our slabs can be easily cut to the desired size using diamond discs for concrete. You can use an ordinary angle grinder or a circular saw for this purpose. Cutting should be done dry, without the use of water.
Drilling holes
By using drill bits and holesaws for concrete, mounting holes for sockets or TV brackets can be made in the panels. All holes must be drilled without impact.

![]()
Installation
Easy and cheap installation
The 1 cm thickness of the boards simplifies the assembly procedure, all you need is DS series polyurethane foam available in our store (it does not require fixing anchors, additional reinforcements or other stabilizers in the case of internal walls). The boards can be mounted to OSB, MDF or GK boards if we do not want to sand the substrate with paint and putty. The gypsum substrate is not suitable for direct bonding of architectural concrete.
Installation instructions
The complete, detailed assembly and storage instructions are available for download.
Extended warranty
2-year warranty for damage after installing the panels (cracks, deformations, falling off the wall) using the dedicated assembly kit listed below in accordance with the assembly instructions.
Now you are probably wondering how many boards and accessories you need for your project?
Use the calculator designed for a comprehensive selection of all necessary materials.

Calculator
Step 1 - Enter the dimensions of the wall
The calculator will calculate, on their basis, the number of plates needed for installation and the necessary accessories. Then select, from the available plate sizes, the plate size and either a landscape or portrait orientation.
Step 2 - see the proposed arrangement of the boards on the wall
The calculator takes into account the cutting of up to two elements with a factory-cast edge from one plate. You will be offered the number of plates along with the necessary accessories for assembly.
Step 3 - add products to the cart
After entering the cart, you will receive additional information on the cost of delivery.
Thanks to the one-step shopping cart, the ordering process is very simple and fast. In one window, you will provide shipping data, invoices, and choose transport and payment methods, and you will finish the whole thing with fast payments by Przelewy24.pl or by traditional transfer.
Additional information:
For the installation of concrete panels, it is recommended to use dedicated accessories also available in our store. Possible factory deviations of architectural concrete slabs should be reported prior to installation.
Due to the characteristics of architectural concrete, differences in the number and size of pits on the surface of individual slabs are possible. Color and dimensional discrepancies (+/- 3 mm) are also allowed.
Before installation, check the entire batch of tiles and plan the distribution of individual boards and the sequence of their assembly by selecting boards from different places on the pallet to maintain the natural appearance of the wall.
In addition, in the case of corten, it is best to impregnate them by spraying them before laying them in order to avoid smudging of rust under your fingers on the surface of the boards during assembly.
For demonstration purposes, the slabs in the photos, realizations and visualizations are shown in various color versions. To make a color selection based on actual colors, we suggest purchasing the concrete slab sampler.
The displayed colors on customer monitor screens may differ from the actual color due to the discrepancy of matrices and the calibrations of the displays.
The boards may have cast remnants on the edges, which the assembly team should grind down before laying the boards on the wall.
WN_DS/2D/Szary_corten/100x50/bez-impregnacji
Data sheet
- Slab series
- (2D) DS series
- Dimensions
- 100x50 cm
- Material
- Concrete
- Structure
- HAP (porous)
- Porosity
- Medium
- Color
- Gray
- Decoration
- Rust
- Weight
- 100x50 cm ~ 8 kg
- Type of reinforcement
- PRC
- Purpose
- Indoor
Outdoor - Resistance
- Fire-resistance
Frost-resistance
Water-resistance (after impregnation) - Thickness
- 1 cm
- For facades
- Yes (after impregnation)
- To kitchen
- Yes (after impregnation)
- To the fireplace
- Yes (with the use of appropriate glue)
- To bathroom
- Yes (with the use of impregnation and flexible grout)
- On the floor
- No
- Impregnation
- No
- Custom dimensions
- No
- Factory cutting to size
- No
- Trimming by the customer
- Yes (dry trimming with diamond tools)
- Drilling by customer
- Yes (drill without hammer)
- Cutting holes by the customer
- Yes (with diamond hole saw)
- I'M ORDERING
- PRODUCT
1. Enter data
Enter wall dimensions and desired slab orientation and we will calculate required amount of slabs and assembly chemicals for You.
Enter wall dimensions
Enter slab parameters
VT Series
Architectonic concrete - smooth or medium porosity.
- ORDER FULFILLMENT: 7-10 business days
- 5 YEARS WARRANTY(with the use of dedicated assembly chemistry)
12 shades of 2D slabs in wide range of 17 sizes (wall and floor). It's characterized by high frost and flame resistance. Perfect for interiors, as well as facades, floors and terraces.
Available sizes:
- 30x60x1 cm
- 60x60x1 cm, 60x60x2 cm
- 80x40x1 cm, 80x40x1,5 cm
- 90x45x1 cm
- 90x55x1 cm
- 100x50x1 cm, 100x50x2 cm
- 100x100x2 cm
- 120x60x1 cm, 120x60x2 cm, 120x60x3 cm
- 120x80x2 cm, 120x80x3 cm
- 150x60x2 cm, 150x60x3 cm
Link to the entire series of VT 2D products in store: (VT Series (2D))
Additionally, 40 patterns of 3D Boards in 10 shades - fulfillment time: 7-10 business days
Link to the entire series of VT 3D products in store: (VT Series (3D))
DS Series
Architectonic concrete with medium or high porosity.
- ORDER FULFILLMENT: 14-21 business days
- 8 basic colors in two porosities (white, light gray, dark gray, anthracite, brown, cappuccino, graphite, green)
- 3 particle colors in two porosities (gold, silver, black)
- 7 colors of corten (white, gray, anthracite, graphite, cappuccino, brown, green (patina))
The DS series is handcrafted and the concrete features a very strong PRC-reinforced structure.
Series attributes:
- Frost-resistant
- Flame-resistant
- For interiors and facades
- Easy installation
Available sizes:
- 30x60x1 cm
- 60x60x1 cm
- 100x50x1 cm
- 120x60x1 cm
Link to the entire series of DS products in store: (DS Series)
Summary
Basic differences between slab series.
VT Series | DS Series | ||
Available concrete colors | 12 | 8 | |
Available sizes | 17 | 4 | |
Slab thickness | 1-3 cm | 1 cm | |
Order fulfillment [business days] | 7-10 | 14-21 | |
Porosity | Smooth / Medium | Medium / High | |
Cutting to size | Yes | No | |
Crafting method | Machine | Handcrafted | |
Type of reinforcement | Chemical | PRC | |
Custom dimensions | No | No | |
- | - | - | - |