VT - (B1 gray white) - concrete floor/terrace slab
zł225.99
Tax included
Concrete floor slabs available in our store with a thickness of 2-3 cm are ideal for a terrace, floor, stairs or sidewalks around the house.
.jpg)
Professional customer service
Secure delivery sent directly to you
Concrete slabs can be used for terraces, walkways around the house, indoor and outdoor floors. Not suitable for car driveways.
The slabs offered by WENEVE are widely used:
- terraces,
- sidewalks,
- floor,
- floor,
- stairs,
- countertops,
- shower trays,
- garden paths,
- for the garden,
- balcony slabs.
MAIN FEATURES OF THE OFFERED SLABS :
- frost-resistant - useful when used outside,
- the slabs can be easily cut and drilled - at the customer`s request, we can cut the slabs to the selected size (PLN 25,00 gross/running meter)
TYPES OF IMPREGNATION:
ARMORED (semi-gloss) - a slab with waterproof characteristics. Mainly intended for: terraces, bathroom.
FACTORY (mat) - increased resistance to water penetration.
NO IMPREGNATION (mat) - natural concrete surface. Not protected against water soaking. Later, the slabs can be impregnated with high-quality, deep-penetrating impregnations available in our store (see).
- 5-YEARS WARRANTY FOR SLABS - for all concrete slabs of the WN_VT series.
You can order the WN_VT series concrete color chart here.
The price applies to 1 slab (in the selected size, thickness and form of impregnation).
For the installation of concrete panels, it is recommended to use dedicated chemicals also available in our store. Possible factory deviations of architectural concrete slabs must be reported before installation.
Due to the characteristics of architectural concrete, differences in the number and size of pits on the surface of individual slabs are possible. Color and dimensional discrepancies (+/- 3 mm) are also allowed.
Before installation, check the entire batch of tiles and plan the distribution of individual boards and the sequence of their assembly by selecting boards from different places on the pallet to maintain the natural appearance of the wall.
For demonstration purposes, the plates in the photos, realizations and visualizations are shown in different color versions. To make color selections based on actual colors, we suggest purchasing the concrete slab sampler.
Product photos show the actual product and were taken by our photography specialists and graphically processed on calibrated screens. The displayed colors on customer monitor screens may differ from the actual color due to the discrepancy of matrices and the calibration of the displays.
WN_VT/2D/B1/120x60/3/BI/SP
Data sheet
- Slab series
- (2D) VT series
- Dimensions
- 120x60 cm
- Material
- Concrete
- Structure
- HAP (porous)
- Porosity
- Medium
- Color
- Gray white
- Weight
- 22x22x2 cm ~ 2 kg
60x60x2 cm ~ 13 kg
80x80x3 cm ~ 42 kg
100x50x3 cm ~ 16 kg
120x60x3 cm ~ 33 kg
150x60x3 cm ~ 42 kg - Type
- Floor slab
- Purpose
- Indoor & Outdoor
- Resistance
- Frost-resistance
Water-resistance (after impregnation) - Thickness
- 3 cm
- On the floor
- Yes
- Factory cutting to size
- Yes (after extra fee)
- Trimming by the customer
- Yes (dry trimming with diamond tools)
- Drilling by customer
- Yes (drill without hammer)
- Cutting holes by the customer
- Yes (with diamond hole saw)
- To garden
- Yes
- For terrace
- Yes
Differences between slab series
VT Series / DS Series
.jpg)
VT Series
Architectonic concrete - smooth or medium porosity.
- ORDER FULFILLMENT: 7-10 business days
- 5 YEARS WARRANTY(with the use of dedicated assembly chemistry)
12 shades of 2D slabs in wide range of 17 sizes (wall and floor). It's characterized by high frost and flame resistance. Perfect for interiors, as well as facades, floors and terraces.
Available sizes:
- 30x60x1 cm
- 60x60x1 cm, 60x60x2 cm
- 80x40x1 cm, 80x40x1,5 cm
- 90x45x1 cm
- 90x55x1 cm
- 100x50x1 cm, 100x50x2 cm
- 100x100x2 cm
- 120x60x1 cm, 120x60x2 cm, 120x60x3 cm
- 120x80x2 cm, 120x80x3 cm
- 150x60x2 cm, 150x60x3 cm
Link to the entire series of VT 2D products in store: (VT Series (2D))
Additionally, 40 patterns of 3D Boards in 10 shades - fulfillment time: 7-10 business days
Link to the entire series of VT 3D products in store: (VT Series (3D))
DS Series
Architectonic concrete with medium or high porosity.
- ORDER FULFILLMENT: 14-21 business days
- 8 basic colors in two porosities (white, light gray, dark gray, anthracite, brown, cappuccino, graphite, green)
- 3 particle colors in two porosities (gold, silver, black)
- 7 colors of corten (white, gray, anthracite, graphite, cappuccino, brown, green (patina))
The DS series is handcrafted and the concrete features a very strong PRC-reinforced structure.
Series attributes:
- Frost-resistant
- Flame-resistant
- For interiors and facades
- Easy installation
Available sizes:
- 30x60x1 cm
- 60x60x1 cm
- 100x50x1 cm
- 120x60x1 cm
Link to the entire series of DS products in store: (DS Series)
Summary
Basic differences between slab series.
VT Series | DS Series | ||
Available concrete colors | 12 | 8 | |
Available sizes | 17 | 4 | |
Slab thickness | 1-3 cm | 1 cm | |
Order fulfillment [business days] | 7-10 | 14-21 | |
Porosity | Smooth / Medium | Medium / High | |
Cutting to size | Yes | No | |
Crafting method | Machine | Handcrafted | |
Type of reinforcement | Chemical | PRC | |
Custom dimensions | No | No | |
- | - | - | - |
Download
Slab specifications - VT/NC
Technical sheet, specification, assembly instructions, storage [PDF]
Download (276.14k) Two-component adhesive [V]
Two-component adhesive CONNECT TOP 1 - technical sheet [PDF]
Download (254.24k) Impregnation liquid [V]
Water repellent for architectural concrete - technical sheet [PDF]
Download (276.69k) You might also like
