DS - concrete slab leveling system
zł39.99
A set of clips for leveling architectural concrete slabs.
Professional customer service
Secure delivery sent directly to you
Concrete structure resembling POURED CONCRETE CEILING.
Available sizes:
60 x 60 x 1 cm
100 x 50 x 1 cm
120 x 60 x 1 cm
150 x 60 x 1 cm
Frost-resistant
Fireproof
Purpose: walls / facades / fences / fireplaces
Concrete slabs can be used both inside and outside buildings as a form of elevation. Boards can also be successfully placed on fences and fireplaces can be covered with them due to their fire resistance.
Porosity
The LS series panels are characterized by porosity (holes on the surface of the panels) of various shapes and depths, while the structure of the entire panel resembles poured concrete for the ceiling or foundation of the house.
Resilience
Architectural concrete GRC (Glassfibre Reinforced Concrete), from which the slabs are made, is concrete reinforced with glass fibre. Thanks to this structure, the manufactured boards can be 1 cm thick, maintaining the strength and durability of two or three times thicker concrete slabs produced with traditional methods. Compressive strength - strength class C30/37. Reaction to fire - class A1.
Depending on the room in which we want to use the boards, they should be properly impregnated. For this purpose, we recommend using an impregnation from our offer (impregnation - buy the product).
Cutting to size
Our slabs can be easily cut to the desired size using diamond discs for concrete. You can use an ordinary angle grinder or a circular saw for this purpose. Cutting should be done dry, without the use of water.
Drilling holes
By using drill bits and holesaws for concrete, mounting holes for sockets or TV brackets can be made in the panels. All holes must be drilled without impact.
Easy and cheap installation
The 1 cm thickness of the boards simplifies the assembly procedure, all you need is LS series Polimer glue available in our store (here). It does not require fixing anchors, additional reinforcements or other stabilizers in the case of internal walls. The slabs can be mounted to OSB boards if we do not want to sand the substrate with paint and putty. The gypsum substrate is not suitable for direct bonding of architectural concrete.
Installation instructions
The complete, detailed assembly and storage instructions are available for download.
Step 1 - Enter the dimensions of the wall
The calculator will calculate, on their basis, the number of plates needed for installation and the necessary accessories. Then select, from the available plate sizes, the plate size and either a landscape or portrait orientation.
Step 2 - see the proposed arrangement of the boards on the wall
The calculator takes into account the cutting of up to two elements with a factory-cast edge from one plate. You will be offered the number of plates along with the necessary accessories for assembly.
Step 3 - add products to the cart
After entering the cart, you will receive additional information on the cost of delivery.
Thanks to the one-step shopping cart, the ordering process is very simple and fast. In one window, you will provide shipping data, invoices, and choose transport and payment methods, and you will finish the whole thing with fast payments by Przelewy24.pl or by traditional transfer.
For the installation of concrete panels, it is recommended to use dedicated accessories also available in our store. Possible factory deviations of architectural concrete slabs should be reported prior to installation.
Due to the characteristics of architectural concrete, differences in the number and size of pits on the surface of individual slabs are possible. Color and dimensional discrepancies (+/- 3 mm) are also allowed.
Before installation, check the entire batch of tiles and plan the distribution of individual boards and the sequence of their assembly by selecting boards from different places on the pallet to maintain the natural appearance of the wall.
For demonstration purposes, the slabs in the photos, realizations and visualizations are shown in various color versions. To make a color selection based on actual colors, we suggest purchasing the concrete slab sampler.
The displayed colors on customer monitor screens may differ from the actual color due to the discrepancy of matrices and the calibrations of the displays.
Data sheet
Enter wall dimensions and desired slab orientation and we will calculate required amount of slabs and assembly chemicals for You.
Architectonic concrete - smooth or medium porosity.
12 shades of 2D slabs in wide range of 17 sizes (wall and floor). It's characterized by high frost and flame resistance. Perfect for interiors, as well as facades, floors and terraces.
Available sizes:
Architectonic concrete with medium or high porosity.
The DS series is handcrafted and the concrete features a very strong PRC-reinforced structure.
Series attributes:
Available sizes:
Link to the entire series of DS products in store: (DS Series)
Architectonic concrete with medium porosity.
The LS series is handcrafted and the concrete has a very strong GRC (Glass-fiber Reinforced Concrete) structure in the case of 1 cm thick slabs. In the case of 2 cm and thicker slabs, PRC (Polypropylen-fiber Reinforced Concrete) reinforcement is used.
Series attributes:
Available sizes:
Link to the entire series of LS products in store: (LS Series)
Basic differences between slab series.
VT Series | DS Series | LS Series | |
Available concrete colors | 12 | 8 | 4 |
Available sizes | 17 | 4 | 3 basic + molded to size |
Slab thickness | 1-3 cm | 1 cm | 1-3 cm |
Order fulfillment [business days] | 7-10 | 14-21 | 3-9 + 14-30 |
Porosity | Smooth / Medium | Medium / High | Medium |
Cutting to size | Yes | No | No |
Crafting method | Machine | Handcrafted | Handcrafted |
Type of reinforcement | Chemical | PRCG | GRC / PRC |
Custom dimensions | No | No | Yes |
- | - | - | - |