VT - (B1 gray white) - architectural concrete slab

Tax included

Slabs are available in 1-3 cm of thickness, which allows you to mount them in any way available on the market.


Gray white

czas realizacji Order fulfillment: 6-10 working days


Professional customer service


Secure delivery sent directly to you

Concrete panels can be used both inside and outside buildings as a form of facade. In combination with various patterns of 3D panels available in our store (see products), you can create unique and modern interiors.

The slabs offered by WENEVE are widely used:

  • room walls,
  • facades,
  • fences,
  • stairs,
  • floors,
  • terraces,
  • countertops,
  • fireplaces etc.


  • frost-resistant and fire-resistant - useful when used on the facade,
  • easy and cheap installation - the thickness of the slabs 1 cm simplifies the installation procedure, all you need is elastic glue, mounting adhesive for ceramic tiles (see), does not require fixing anchors, additional reinforcements or other stabilizers,
  • the slabs can be easily cut and drilled and mounted to OSB, MDF or GK slabs - at the customer`s request, we can cut the slabs to the selected size (PLN 25,00 gross/running meter)


ARMORED (semi-gloss) - a slab with waterproof and stain-resistant characteristics. Mainly intended for: kitchen, bathroom, facade due to the very good resistance to stains, grease and water penetration.

FACTORY (mat) - increased resistance to water penetration. Main purpose: living room, bathroom, facade, corridor, staircase, fireplace surround.

NO IMPREGNATION (mat) - natural concrete surface. Not protected against water soaking. Later, the slabs can be impregnated with high-quality, deep-penetrating impregnations available in our store (see).

  • 5-YEARS WARRANTY FOR SLABS - for all concrete slabs of the WN_VT series.

You can order a sampler of WN_VT slabs - here.


The price applies to 1 slab (in the selected size, thickness and form of impregnation).

For the installation of concrete panels, it is recommended to use dedicated chemicals also available in our store. Possible factory deviations of architectural concrete slabs must be reported before installation.

Due to the characteristics of architectural concrete, differences in the number and size of pits on the surface of individual slabs are possible. Color and dimensional discrepancies (+/- 3 mm) are also allowed.

Before installation, check the entire batch of tiles and plan the distribution of individual boards and the sequence of their assembly by selecting boards from different places on the pallet to maintain the natural appearance of the wall.

For demonstration purposes, the plates in the photos, realizations and visualizations are shown in different color versions. To make color selections based on actual colors, we suggest purchasing the concrete slab sampler.

Product photos show the actual product and were taken by our photography specialists and graphically processed on calibrated screens. The displayed colors on customer monitor screens may differ from the actual color due to the discrepancy of matrices and the calibration of the displays.


Data sheet

Slab series
(2D) VT series
90x55 cm
HAP (porous)
Gray white
30x60x1 cm ~ 3,3 kg
60x60x1 cm ~ 6,6 kg
60x60x2 cm ~ 13 kg
80x40x1 cm ~ 8 kg
80x40x1,5 cm ~ 16 kg
90x45x1 cm ~ 10 kg
90x55x1 cm ~ 11,5 kg
100x40x2 cm ~ 20 kg
100x50x1 cm ~ 12,5 kg
100x50x2 cm ~ 15,2 kg
100x100x2 cm ~ 20 kg
120x60x1 cm ~ 18 kg
120x60x2 cm ~ 26 kg
120x60x3 cm ~ 33 kg
120x80x2 cm ~ 28 kg
120x80x3 cm ~ 38 kg
150x60x2 cm ~ 35 kg
150x60x3 cm ~ 45 kg
240x60x2 cm ~ 72 kg
240x60x3 cm ~ 72 kg
300x60x2 cm ~ 90 kg
300x60x3 cm ~ 90 kg
Wall slab
Indoor & Outdoor
Water-resistance (after impregnation)
1 cm
For facades
Yes (after impregnation)
To kitchen
Yes (after impregnation)
To bathroom
Yes (with the use of impregnation and flexible grout)
Factory cutting to size
Yes (after extra fee)
Trimming by the customer
Yes (dry trimming with diamond tools)
Drilling by customer
Yes (drill without hammer)
Cutting holes by the customer
Yes (with diamond hole saw)

1. Enter data

Enter wall dimensions and desired slab orientation and we will calculate required amount of slabs and assembly chemicals for You.

Enter wall dimensions

Enter slab parameters

VT Series

Architectonic concrete - smooth or medium porosity.

płyta beton architektoniczny seria vt

  •  ORDER FULFILLMENT: 7-10 business days
  •  5 YEARS WARRANTY(with the use of dedicated assembly chemistry)

12 shades of 2D slabs in wide range of 17 sizes (wall and floor). It's characterized by high frost and flame resistance. Perfect for interiors, as well as facades, floors and terraces.

Available sizes:

  • 30x60x1 cm
  • 60x60x1 cm, 60x60x2 cm
  • 80x40x1 cm, 80x40x1,5 cm
  • 90x45x1 cm 
  • 90x55x1 cm
  • 100x50x1 cm, 100x50x2 cm  
  • 100x100x2 cm
  • 120x60x1 cm, 120x60x2 cm, 120x60x3 cm
  • 120x80x2 cm, 120x80x3 cm
  • 150x60x2 cm, 150x60x3 cm

Link to the entire series of VT 2D products in store: (VT Series (2D))
Additionally, 40 patterns of 3D Boards in 10 shades - fulfillment time: 7-10 business days
Link to the entire series of VT 3D products in store: (VT Series (3D))

DS Series

Architectonic concrete with medium or high porosity.

płyta beton architektoniczny seria ds

  •  ORDER FULFILLMENT: 14-21 business days
  •  8 basic colors in two porosities (white, light gray, dark gray, anthracite, brown, cappuccino, graphite, green)
  •  3 particle colors in two porosities (gold, silver, black)
  •  7 colors of corten (white, gray, anthracite, graphite, cappuccino, brown, green (patina))

The DS series is handcrafted and the concrete features a very strong PRC-reinforced structure.

Series attributes:

  • Frost-resistant
  • Flame-resistant
  • For interiors and facades
  • Easy installation

Available sizes:

  • 30x60x1 cm
  • 60x60x1 cm
  • 100x50x1 cm
  • 120x60x1 cm

Link to the entire series of DS products in store: (DS Series)


Basic differences between slab series.

VT Series

DS Series

Available concrete colors



Available sizes



Slab thickness

1-3 cm

1 cm

Order fulfillment [business days]




Smooth / Medium

Medium / High

Cutting to size



Crafting method



Type of reinforcement



Custom dimensions








Slab specifications - VT/NC

Technical sheet, specification, assembly instructions, storage [PDF]

Download (182.88k)

Two-component adhesive [V]

Two-component adhesive CONNECT TOP 1 - technical sheet [PDF]

Download (254.24k)

Cement adhesive for slabs [V]

SILVER C2TE cement adhesive - technical sheet [PDF]

Download (226.75k)

Concrete primer PerfektGrunt [V]

Deep penetrating primer - technical sheet [PDF]

Download (211.82k)

Impregnation liquid [V]

Water repellent for architectural concrete - technical sheet [PDF]

Download (276.69k)

You might also like

Related Products (There are 8 other products in the same category)

close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password