Model of slabs with decorative particles has a decorative pattern embedded on the surface which, at different angles with lighting directed at it, brings out unique visual qualities from the slabs in the form of particles shimmering in the light. Each slab has a different and unique pattern of particles on the surface which is its value.
Architectural concrete PRC (Polymer Reinforced Concrete) the slabs are made of is reinforced concrete with polymer fibers. Thanks to this structure, produced slabs can have 1 cm thickness, keeping strength and durability two three times thicker concrete slabs that are made using traditional methods.
Concrete slabs can be used both for inside houses as well as outside as facade. Combined with a variety of patterns 3D panels available in our online store (view 3D panels), you can create unique and modern interiors.
Slabs offered by WENEVE have wide range of applications:
- room walls,
- fireplace enclosures.
MAIN FEATURES OF THE PRODUCT:
- Ultralight - 30x60 cm - 3 kg / 60x60 cm - 6 kg / 100x50 cm - 8 kg / 120x60 cm - 12 kg.
- Frost resistant - for indoor use on walls as well as building facades.
- Reinforced - our slabs are one of the strongest PRC slabs on the market, thanks to a specially developed formula of concrete combined with properly selected aggregates and polymer fiber reinforcing the entire structure of the board. Compressive strength - strength class C20 / 22. Reaction to fire - class A1.
- Easy and cheap installation - 1 cm thickness of the plates simplifies the assembly procedure, you will only need some primer and one of our glues such as: polyurethane foam glue or elastic glue (does not require fixing anchors, additional reinforcements other stabilizers). Our slabs can be easily cut, drilled and mounted to the OSB, MDF Gypsum boards.
- Depending on the room in which we want to use the slabs, they should be used accordingly impregnated after installation. For this purpose, we recommend using an impregnation from our offer (view and buy).
- 2 YEARS OF WARRANTY ON SLABS - on all concrete slabs of the DS series, using a dedicated installation set (view and buy).
Below is a color sampler of concrete slabs from the DS series: (buy samples here)
The price is for 1 pc (in the selected size)
For the installation of concrete panels it is recommended to use dedicated chemicals also available in our store. Possible factory deviations of architectural concrete slabs must be reported before installation.
Due to the characteristics of architectural concrete, differences in the number and size of pits on the surface of individual slabs are possible. Color and dimensional discrepancies (+/- 3 mm) are also allowed.
Before installation, check the entire batch of slabs and plan the distribution of individual slab and the sequence of their installation, selecting slabs from different places on the pallet to maintain the natural appearance of the wall.
For demonstration purposes, the plates in the photos, realizations and visualizations are shown in different color versions. To make a color selection based on actual colors, we suggest you purchase sampler of DS series concrete slabs.
The displayed colors on customer monitor screen may differ from the actual color due to the discrepancy of displays and the calibration of the displays.
The slabs may have cast remnants on the edges, which the assembly team should sand down before installing slabs on the wall.