DYNASIL Smart - waterproofing impregnate...
zł179.99
A modern protective impregnation against stains for absorbent surfaces made of architectural concrete and natural stone.
Professional customer service
Secure delivery sent directly to you
Concrete structure resembling POURED CONCRETE CEILING.
Cast to any size (tolerance +/- 3 mm). The maximum size of the board is 150x80 cm with a thickness of 1 or 2 cm.
Frost-resistant
Fireproof
Purpose: walls / facades / fences / fireplaces
Concrete slabs can be used both inside and outside buildings as a form of elevation. Boards can also be successfully placed on fences and fireplaces can be covered with them due to their fire resistance.
Porosity
The LS series panels are characterized by porosity (holes on the surface of the panels) of various shapes and depths, while the structure of the entire panel resembles poured concrete for the ceiling or foundation of the house.
Resilience
We offer slabs from the LS series with a thickness of 1 cm, for which we use GRC (Glass Reinforced Concrete) glass fibers.
The 2 cm thick slabs are reinforced with polypropylene fiber PRC (Polypropylen Fiber Reinforced Concrete).
Compressive strength - strength class C30/37. Reaction to fire - class A1.
Depending on the room in which we want to use the boards, they should be properly impregnated.
Impregnation is absolutely required on the façade, in the bathroom and in the kitchen.
It is not required in rooms where it serves as a decorative wall, e.g. behind a TV set, while the use of an impregnation facilitates its cleaning and prevents accidental splashing of various types of liquids. Concrete is an absorbent material and any dirt on it, e.g. with coffee, juice or wine, results in a stain that cannot be removed in the case of non-impregnated concrete.
For this purpose, we recommend using an impregnation from our offer (impregnation - buy the product).
Cutting to size
Our slabs can be easily cut to the desired size using diamond discs for concrete. You can use an ordinary angle grinder or a circular saw for this purpose. Cutting should be done dry, without the use of water.
Drilling holes
By using drill bits and holesaws for concrete, mounting holes for sockets or TV brackets can be made in the panels. All holes must be drilled without impact.
The thickness of the boards 1 cm and 2 cm allows the use of polymer glue available in our store [here]. This installation does not require anchors, additional reinforcements or other stabilizers in the case of internal walls. Boards from the LS series with a thickness of 1 and 2 cm should be mounted on the OSB board, regardless of the existing substrate. The boards must be anchored to the wall with wall plugs at a minimum distance of 50 cm from each other.
Installation instructions
The complete, detailed assembly and storage instructions are available for download.
Step 1 - complete the dimensions and number of boards you need to order
The maximum slab size that you can order in this product is 150x80 cm. The thickness of the boards you can order is 1 or 2 cm.
Plus, you add additional dimensions of the plates to a different dimension. Underneath, after entering all the parameters, you will see a summary with the quantity in m2 and the price for all the boards you want to order.
Step 2 - click on the GO NEXT button
In the next view, you will see a summary along with the quantity that will be added to the cart. The product is calculated for 0.1 m2, therefore the quantities added to the basket may differ from the quantity of boards you want to order. The system automatically calculates how many products should be added to the basket based on the entered dimensions of the plates. This is the stage where you can further correct the entered parameters of the plates by clicking REMOVE ENTERED DATA. If you don't need to do this, go to step 3.
Step 3 - add the product to the cart and order CDs
By going to the basket you will receive a summary with shipping costs. Then just enter your order details and proceed to payment. After receiving the payment, the order will go into production with the approximate delivery date specified in the product description.
For the installation of concrete panels, it is recommended to use dedicated accessories also available in our store. Possible factory deviations of architectural concrete slabs should be reported prior to installation.
Due to the characteristics of architectural concrete, differences in the number and size of pits on the surface of individual slabs are possible. Color and dimensional discrepancies (+/- 3 mm) are also allowed.
Before installation, check the entire batch of tiles and plan the distribution of individual slabs and the sequence of their assembly by selecting slabs from different places on the pallet to maintain the natural appearance of the wall.
For demonstration purposes, the slabs in the photos, realizations and visualizations are shown in various color versions. To make a color selection based on actual colors, we suggest purchasing the concrete slab sampler.
The displayed colors on customer monitor screens may differ from the actual color due to the discrepancy of matrices and the calibrations of the displays.
Data sheet
Architectonic concrete - smooth or medium porosity.
12 shades of 2D slabs in wide range of 17 sizes (wall and floor). It's characterized by high frost and flame resistance. Perfect for interiors, as well as facades, floors and terraces.
Available sizes:
Architectonic concrete with medium or high porosity.
The DS series is handcrafted and the concrete features a very strong PRC-reinforced structure.
Series attributes:
Available sizes:
Link to the entire series of DS products in store: (DS Series)
Architectonic concrete with medium porosity.
The LS series is handcrafted and the concrete has a very strong GRC (Glass-fiber Reinforced Concrete) structure in the case of 1 cm thick slabs. In the case of 2 cm and thicker slabs, PRC (Polypropylen-fiber Reinforced Concrete) reinforcement is used.
Series attributes:
Available sizes:
Link to the entire series of LS products in store: (LS Series)
Basic differences between slab series.
VT Series | DS Series | LS Series | |
Available concrete colors | 12 | 8 | 4 |
Available sizes | 17 | 4 | 3 basic + molded to size |
Slab thickness | 1-3 cm | 1 cm | 1-3 cm |
Order fulfillment [business days] | 7-10 | 14-21 | 3-9 + 14-30 |
Porosity | Smooth / Medium | Medium / High | Medium |
Cutting to size | Yes | No | No |
Crafting method | Machine | Handcrafted | Handcrafted |
Type of reinforcement | Chemical | PRCG | GRC / PRC |
Custom dimensions | No | No | Yes |
- | - | - | - |