Hydrophobic impregnation for architectural concrete.
PRODUCT DESCRIPTION: Impregnation intended for colorless protection against water, environmental conditions weather as well as light dirt: architectural concrete, concrete facade stone, facing bricks, natural stone, paving stones, joints and all concrete accessories, as well as thin-layer acrylic and silicone facade coatings. Operation and efficiency largely depend on the degree of density of the structure of the impregnated material. The impregnation penetrates the structure of the material, sealing the micro-pores. Apply the impregnation in fragments, it is recommended to use a roller or spray for application. Possible number of impregnation layers is 1-3, wet on wet method. If necessary, impregnation can be repeated after the previous layers are dry (recommended).
APPLICATION: It is designed for impregnation of concrete facade stone, facing bricks , natural stone, paving stones, joints and all concrete accessories.
does not change the surface appearance, does not create a coating,
not visible after drying,
drying time 5h,
effective indoors and outdoors,
keeps the natural look of concrete,
CONSUMPTION: 1L is enough for approx 6-13 m2 (1 layer).
PACKAGING: 1L container.
The durability of the impregnation largely depends on the applied care products and the use of the surface. It is not advisable to use highly degreasing agents containing solvents or alcohol, as well as acidic and strongly alkaline preparations that may weaken the effect of the impregnation. For frequently washed surfaces that come into contact with cleaning agents, e.g. bathrooms or kitchen worktops, we recommend renewing the impregnation every 2 years.
Before starting work, perform a test on a small area, out of sight, to assess the appearance of the material after impregnation. If the effect is satisfactory, you can proceed to impregnation of the entire surface. After the works are finished, ventilate the room until the smell disappears completely. Clean tools with water.
(2D) BT series
Differences between slab series
VT Series / BT Series / DS Series
Architectonic concrete - smooth or medium porosity.
ORDER FULFILLMENT: 7-10 business days
5 YEARS WARRANTY(with the use of dedicated assembly chemistry)
10 shades of 2D slabs in wide range of 22 sizes (wall and floor).It's characterized by high frost and flame resistance. Perfect for interiors, as well as facades, floors and terraces.
Additionally, 40 patterns of 3D Boards in 10 shades - fulfillment time: 7-10 business days
Link to the entire series of VT 3D products in store: (VT Series (3D))
Architectonic concrete with medium porosity.
ORDER FULFILLMENT: 10-14 business days
4 basic colors in one porosity (white, light gray, gray, anthracite)
3 premium models in one porosity (brass, copper, corten vintage)
The BT series is handcrafted from strong and durable concrete. Medium porosity of slabs provides the appearance of naturally poured concrete in the formwork. The premium versions are brass or copper coated plates and a vintage corten loft version which is mimicking an old sheet covered with rust.
Interiors and facades
Link to the entire series of BT products in store:(BT Series)
Architectonic concrete with medium or high porosity.
ORDER FULFILLMENT: 21-35 business days
7 basic colorsin two porosities (white, light gray, dark gray, anthracite, brown, cappuccino, graphite)
3 particle colorsin two porosities (gold, silver, black)
3 colors of corten(white, gray, anthracite)
The DS series is handcrafted and the concrete features a very strong PRC-reinforced structure.
For interiors and facades
Link to the entire series of DS products in store:(DS Series)
Basic differences between slab series.
Order fulfillment [business days]
Smooth / Medium
Medium / High
Cutting to size
Type of reinforcement
Chemical (+ reinforcement mesh for 120x60 cm slabs)
Polecono mi go do przyciemnienia betonu i jednoczesnego zaimpregnowania i faktycznie działa tak jak opisywał sprzedawca.