Main product features 

 Product dimensions:  135 x 38 x 4,4 cm

  Frost resistant

  Fire resistant


The 3D decorative panel made of architectural concrete PB41 "Lamel" is a board with a grooved, regular structure and form. Certainly more durable than their wooden counterpart. These three-dimensional, unique plates are available in a wide range of colors. It is possible to mount the panels horizontally and vertically. Their application is quite wide - they can be used not only as interior decoration, but are also intended for installation on the facade. They can fill the entire wall or become its interesting accent. In addition, our lamella panels will positively affect the acoustics of the interior.


 Our panels will positively affect the acoustics of the interior.

Properties

 Purpose: walls / facades / fences / fireplaces

Concrete slabs can be used both indoors and outdoors as a form of the facade. In combination with various patterns of 2D panels available in our store (see products), you can create unique and modern interiors and building facades. The boards can also be successfully laid on fences and fireplaces due to their fire resistance.

  Resilience

The architectural concrete from which the offered VT series panels are made is chemically reinforced concrete with the use of coarser aggregate. Thanks to this structure, the produced slabs can be 1 cm thick, maintaining strength and durability. Reaction to fire - class A1.

Impregnation

Depending on the room in which we want to use the slabs, they should be properly impregnated. For this purpose, we recommend using an impregnation from our offer  (impregnation - buy the product).

Factory impregnation

In addition, we offer factory-impregnated slab options for even greater convenience and speed of installation. Just select this option from the drop-down list of available product combinations.

Machining of concrete slabs of the VT series

  Cutting to size

Our slabs can be easily cut to the desired size using diamond discs for concrete. You can use a regular angle grinder or a circular saw for this purpose. Cutting should be done dry without the use of water. 

For the convenience of our customers - on request - we can cut the ordered slabs to the selected size. The cost of such a service is PLN 50 gross per running meter of cut.

  Drilling holes

Using drills and hole saws for concrete, mounting holes for sockets or TV brackets can be made in the slabs. All holes must be drilled without hammering. 

Installation

 Easy and cheap assembly 

All you need is polymer glue or two-component C2TE glue - available in our store (does not require anchors, additional reinforcements or other stabilizers in the case of internal walls). The slabs can be mounted to OSB, MDF or GK slabs if you do not want to sand the paint and putty on the substrate. The gypsum substrate is not suitable for direct bonding of architectural concrete. 

 Installation instructions

The complete, detailed installation and storage instructions after delivery are available for download here.


 Extended warranty

5-year warranty against damage after installing the slabs, using a dedicated mounting kit, listed in the "necessary mounting accessories" section.
Cracks, deformations, and falling off the wall - may occur if the recommended accessories are not used.
Read the assembly instructions before starting any assembly work.

How to choose the right amount of slabs and accessories for your wall?

Use the calculator that we have designed for a comprehensive selection of all necessary materials.

  Calculator

Step 1 -  enter the dimensions of the wall
The calculator will calculate, based on them, the number of panels and accessories needed for installation. Then, from the available slab sizes, select the slab size and the horizontal or vertical orientation.

Step 2 -  see the proposed arrangement of slabs on the wall
The calculator takes into account cutting up to two elements with a factory-cast edge from one slab. You will be offered the number of slabs along with the necessary accessories for assembly. 

Step 3 -  add products to the cart
After going to the cart, you will receive additional information on delivery costs. 

Thanks to the one-step shopping cart, the ordering process is very simple and fast. In one window, you will enter shipping data, and invoices, choose the transport and payment method, and finish the whole process with fast payments by Przelewy24.pl or a traditional transfer.

 

Go to the calculator 

 Additional information:

▫️ For the installation of concrete panels, it is recommended to use dedicated mounting accessories also available in our store.

▫️ Possible factory deviations of architectural concrete slabs should be reported before installation.

▫️ Due to the characteristics of architectural concrete, differences in the number and size of pits on the surface of individual slabs are possible. Color and dimensional discrepancies (+/- 3 mm) are also allowed.

▫️ Before installation, check the entire batch of slabs and plan the distribution of individual slabs and the order of their assembly by choosing slabs from different places on the palette to preserve the natural appearance of the wall.

▫️ For demonstration purposes, the slabs in the photos, from the implementation and visualizations are shown in different color versions. To make a color selection based on actual colors, we suggest purchasing a concrete slab sample book. 

▫️ The colors displayed on customer monitor screens may differ from the actual color due to discrepancies in the matrices and calibration of the displays.

▫️ The slabs may have cast residues on the edges, which the assembly team should sand down before laying the slabs on the wall.